|
SHIVGANGA DRILLERS LIMITED
SCHEMATIC LIFTING PLAN
|
|
Rig:
Job/Lifting Description:
Location:
Date:
Work Permit No.:
Crane Type and Capacity:
Material Weight:
Radius:
Boom Length:
Load Chart Capacity:
Load Chart Capacity (%):
| (Lift shall not be carried out if the load charts capacity exceeds 80%) | |||
|---|---|---|---|
| Sr. No | Check Points | Yes | No |
| 1 | Valid 3rd party test certificates available for crane and rigging gears used. | ||
| 2 | Riggers are bearing third party authorization card | ||
| 3 | Crane operator certified (Licence Available) | ||
| 4 | Swinging radius barricaded | ||
| 5 | Riggers wearing reflective vest | ||
| 6 | Ground stability verified | ||
| 7 | Lifting gears and equipment bearing current Colour code | ||
| 8 | Slings & ropes in good condition | ||
| 9 | Taglines in use | ||
| 10 | Crane outriggers and pads are in good position | ||
| 11 | Load secured properly | ||
| 12 | Oil/fuel leakage | ||
| 13 | Daily inspection checklist completed for crane. | ||
| 15 | Physical condition of lifting gear | ||
| 16 | Any other: | ||
Note:
• Crane position to be (0.5 meter + depth of excavation) from edge of excavation.
• Max permissible wind speed for lifting operation is 10 Mtr./Sec.
Remarks / Comments:
| Lift Plan | Prepared By | Approved By (HSE) |
|---|---|---|
| Name | ||
| Signature |